Garage

Using this powerful home-made puller to remove a large bearing or gear from the shaft will not be a problem. You don’t even need to strain. To make such a puller is also quite simple. However, some operations will require a lathe. First of all, a disk of a suitable diameter will need to be cut from a piece of metal.

The simplest sandblasting can be done in garage conditions in literally 20 minutes on virtually the knee. And he will work from the exhaust pipe of the car. Of course, this design will not pull large volumes, but it was not created for this. To clean something on small things or on the same car (to remove rust on the bottom and sills) - this task will be done by sandblasting.

Opening a tin can is not a problem. If there is no ordinary opener at hand, then you can do it with a knife. True, it will not turn out very neatly. In this review, the author shows how to make a do-it-yourself semi-automatic opener for cans. Such a thing can be useful both at home and during outdoor recreation.

With the help of a puller (or as it is also called a lifter), it is possible to eliminate various mechanical damage on the surface of car body parts. Using this device, you can quite quickly and with the highest quality repair dents or creases. Factory pullers are not cheap, therefore, in this review, the author offers a budget option for the device.

In this review, the author makes a simple home-made, which is useful in the home workshop. It is suitable for gluing wooden frames. To make this device, you will need wooden blocks 20x50 mm, as well as eight furniture bolts with wing nuts. First you will need to saw off four planks 300 millimeters long.

Today it is very popular to make various decorative crafts from glass bottles. Well, why not? Material for work is available and you can even say - free. And finished products from transparent or darkened glass are very original and durable. The only problem is to gently and evenly cut the glass bottles into pieces.

In this review, the author shares the idea of ​​how to make a tripod from polypropylene pipes. The design is folding that simplifies transportation. You can use a tripod both in tandem with the construction laser level, and to mount other devices, including the camera. The base of the tripod is a tripod.

In this review, the author shows how to make a do-it-yourself water pump with your own hands. It can be used for pumping water from one tank to another or for watering in the country. For the manufacture of the pump, an electric drill and a plastic sewer pipe with a diameter of 50 mm will be required. The first step is to cut off a piece of PVC pipe of the required length.

If you work a lot with the skin, then you will need a good and most importantly - a comfortable knife. Buying it is not necessary - you can do it yourself. You will need a piece of sheet metal (you can use a saw blade) and a wooden block. First of all, on a piece of paper we draw a sketch of the future knife by hand (or you can find a ready-made sketch on the Internet).

In the home carpentry workshop, a manual milling cutter is a very necessary, and sometimes completely indispensable tool. In this review, the author shows how to make a manual wood mill from angle grinder with your own hands. In the keyless chuck for a drill, it will be necessary to drill a hole of the desired diameter and cut the thread in it so that it can be screwed onto the shaft of the gearbox.

Chrome inscriptions, numbers and other elements on a car - this does not always look beautiful. And sometimes - even wretchedly. Many car owners prefer exclusively plastic parts without any coatings, repainted in black or other colors. If you are one of them, then you will probably be interested in learning a simple working way how to remove chrome from plastic.

Sometimes there is not enough free space in the workshop, which causes certain inconvenience in the process of work. However, in some situations, the turntable may solve this problem. You can make it with your own hands from metal. As a countertop, the author uses a sheet of metal 2 mm thick (sheet dimensions - 100 * 100 cm).

In this review, the author makes a do-it-yourself bending machine for the garage and home workshop. You can bend on it not only the reinforcement, but also round and square rods, strips, etc. The arm bender consists of two main parts. The lower part is the base. Made of 200x150 mm plate and 4 mm thick.

In this review, the author shows the process of making simple home-made clamps for a home workshop or garage. They are useful when assembling and gluing furniture panels, cutting boards and other large wood blanks. Clamps require round steel pipes and home-made wing nuts.

In this review, the author makes a compact grinding station of two grinding machines. And first of all, it is necessary for convenience. The location of grinding machines on top of each other offers many advantages. You can process different workpieces with a relatively small area in the workplace. That is, you can install four different disks or stones to perform specific tasks.

In this review, the author will rebuild the anvil, which is made of a piece of a conventional railway rail. The view of the anvil is very shabby, so the task is to ennoble it a little. For a “cosmetic” restoration, you will need a grinder with cutting and cleaning discs, as well as a welding machine.

A place in a home workshop should always be used rationally. And therefore, a cabinet for storing a tool with a folding table will definitely not be superfluous. You can do it yourself. This will require profile pipes and plywood. Very often, these materials gather dust in a corner idle. There is a reason to use them with benefit.

In this review, the author shares the idea of ​​how to make a knurled bolt in a garage or home workshop. To do this, you need to make a simple device and prepare the bolt itself. Let's start with the manufacture of the device. It will be necessary to cut four blanks from a metal plate with a thickness of at least 10 mm.

In this review, the wizard shows how, using simple and affordable materials, to make a drum grinding machine with your own hands. For the manufacture of a grinding machine, plywood 20 mm thick will be required, as well as some other materials. First of all, the master cuts off two pieces of plywood. Having set a gap between them, the author connects them using four door hinges.

What do you think, what a small angle grinder may actually miss? What have manufacturers forgotten about? Does this tool really need to be improved? On the one hand, a grinder (even a small one!) Is already a universal and powerful electric tool. Using angle grinders, using the appropriate discs, you can cut not only metal, but also concrete and wood.