Garage

In this review, the wizard shows the process of making a simple home-made device for convenient transportation of the trailer. To do this, you need a ball for the towbar, sections of the profile pipe, two hubs and two wheels. First of all, it is necessary to cut off two pieces of a square profile pipe of suitable length and weld them together (perpendicular to each other).

It doesn’t matter - are you going to lay the laminate on the floor or fasten to the wall - you need to cut it so that there are no chips left on the front surface. In this review, the author shares his experience and tells how to achieve the perfect result when working with laminate flooring. It is possible to saw a laminate using an electric jigsaw, as well as a manual circular (or on a circular saw).

In this review, the author shares the idea of ​​how to make a powerful cutting machine for metal on the basis of a grinder with your own hands. This is a good idea for a home workshop or garage. True, its implementation is a rather laborious matter, and it will take 1-2 days for sure. First you need to make a table on which the cutting machine from the grinder will be placed.

In this review, the author shows the manufacturing process of a home-made three-roll machine for rolling strips and sheet metal. The design is simple, but for the manufacture of some parts you will need a lathe. First of all, the author cuts out two square-shaped plates. After marking with a crown, you need to drill a hole in the center of the workpiece, and then cut the groove with a grinder.

In this review, the author shows how to independently make a head for a motorcycle throttle cable in a garage. The cable head can be made of lead or aluminum. To cast it, you will first need to make a mold. The author uses a bolt. The first step is to find the center on the head of the bolt.

In this review, the author shows how to recycle plastic at home in order to obtain blanks for knife handles, etc. As a starting material, it is better to use not plastic bottles, but denser plastic - for example, containers for household chemicals or used seals. To work, you need a baking sheet or tray, an electric stove (preferably an oven) and a mold.

On our site you can find various designs of machine tools and home-made fixtures that are designed to bend metal in a home workshop and garage. We recommend reading: how to make a manual bending machine with your own hands; do-it-yourself compact desktop bending machine. In this review, we will tell you about another design of a homemade bending machine.

In this review, the author shares an interesting idea and shows how to make a do-it-yourself table-type articulated lever clamp with your own hands. The device has a horizontal base, with which it is attached to the table, and can be used for convenient and quick fixation of metal or wooden workpieces during welding and assembly operations.

In this review, the master shows how to make a simple drum grinding nozzle for angle grinders with your own hands. The author tries to convey the following with her homemade product: why buy factory nozzles for grinding when they can be made independently? And really - if there is time, why not make yourself such a nozzle (or even a kit consisting of nozzles of different diameters).

In this review, the author shows how to make a simple device for quick cleaning (peeling) of corn from grain. The principle of operation of the device is quite simple: cleaning of corn occurs due to friction of the surface of the cob on the working elements located in the body of the device. First of all, the author cuts off a piece of a round pipe of the desired length.

An ordinary electric planer can be used to make a handy mini planer. And in this review, the author shows how to do this. The machine is suitable for processing small workpieces. First, it will be necessary to cut the workpieces from the profile pipe (according to the size of the electric planer). After that, the author welds the first four parts.

In this review, the wizard shows how to bend a profile pipe (at an angle of 90 degrees), without using a bending machine. You can do this with a simple template. As a pipe that needs to be bent, the author uses a rectangular section profile (size - 60x20 mm). First, the author cuts out a quarter-circle pattern from paper.

In this review, the author shows how to make a tool for processing workpieces from metal and wood. The design is quite simple, so making such a device will not be difficult. To make homemade products you will need a board or plywood and a piece of metal plate. First of all, the author cuts a piece of the board and makes a marking on it (the dimensions of the workpiece can be arbitrary, as you wish).

In this review, the author shows how to make a simple water separator (including an oil separator!) From a propane cylinder. The design itself is quite simple - repeating it will not be any problem. Before cutting the cylinder with a grinder or drilling, be sure to fill it with water. First you need to bleed all the gas and drain the condensate.

In this review, the master shows the process of making a homemade electric drill nozzle. This nozzle is needed for drilling holes in uncomfortable or inaccessible places. In fact, it is a flexible shaft, but in a rigid "frame", making it convenient to position. We recommend reading: a homemade drill nozzle for making wooden spoons.

In many homes, in the garage or in the workshop, rubbish is often collected in the form of scraps of a polypropylene pipe and damaged fittings (for example, they remained after repair). If you don’t know where to attach them, take note of the recycling idea. In this review, the author shows how to make a pulley out of unnecessary scraps of PP pipes.

In this review, the author shows how to make a home-made inertia-free hammer with a nail puller yourself. It will come in handy in any workshop. Such a hammer can be used for various metalwork. Its main feature is that it does not bounce on impact. First of all, it is necessary to cut a piece of the profile pipe with a section of 40 * 40 mm.

In this review, the author shows an interesting way how to make a clamp from nuts and bolts with your own hands. And for this, neither a lathe nor a welding machine will be required. A home-made clamp allows you to connect individual elements and parts to a wire tie. In this case, the connection itself is quite durable.

In this review, the author decided to make a useful thing out of an electric motor from a Soviet washing machine. This is a grinding machine. The electric motor power is 180 W. The author decided to make a grinding machine case from plywood. Recommended reading: Grinder (grinder) for the home workshop. First of all, two pieces of the same size must be cut from a piece of plywood.

In this review, the author makes a flexible shaft for an electric drill - it can come in handy when you need to drill something or twist / unscrew in an inaccessible place. To make homemade products you will need a speedometer cable from a car, a bicycle sleeve, as well as a piece of plastic sewer pipe. First of all, we remove the axis from the bicycle hub and weld it to the end of the speedometer cable, having previously cut it.