Homemade rocket furnace from a profile tube and cylinder

What modifications of the rocket furnace today do not exist: stationary, mobile - on wheels, and even compact for field conditions. In this review, we will consider another version of a rocket furnace for a summer residence, garage and a private house.

In this case, the master decided to make a stationary (portable) rocket furnace from a cylinder and a profile pipe.

First of all, it is necessary to cut off the sole of the cylinder on the grinder, on which it rests, when it is in the vertical position, and the “collar”. Then the master makes a marking and cuts out a rectangular “window” in the cylinder body.

The main stages of work

On top of the window cut out by the grinder it is necessary to put and weld a piece of sheet metal. Also, in the body of the container, it will be necessary to make a small cutout for the chimney, and scald by manual arc or semi-automatic welding.

Further, from a square profile pipe with a cross section of 100 * 100 mm, it will be necessary to weld, in fact, the rocket furnace itself of a standard design. And also it is necessary to make a support rack of an N-shaped form from a profile of 30 * 30 mm or smaller.

At the last stage of the work, it will be necessary to clean the weld seams using angle grinders and paint with heat-resistant paint. You can watch the detailed process of making a homemade rocket furnace from a profile pipe and a cylinder in the video on our website.