With a simple home-made tool for cutting glass at home, you can cut glass of any thickness and size. Moreover, both sheet glass, which is used for glazing windows, etc., and glass products - bottles, cans, etc.
To manufacture this device, you will need a piece of a profile pipe 1 meter long, as well as a nichrome wire and a power source. You can use steel wire, but for a long time it is not enough - it burns out.
First of all, the master cleans the profile pipe from rust. Then it will be necessary to cut off a pair of workpieces 100 mm long, which will be used as legs for adaptation.
The resulting two "paws" will need to be welded along the edges of the remaining piece of profile. Moreover, on one side of the profile pipe, it is necessary to make a cut at an angle of 45 degrees, and drill a hole in this place.
The process of making a homemade device
For the manufacture of this homemade product, in addition to the profile pipe, you will also need a spark plug from the car and a metal rod, which will first need to be welded together, and then welded to the workpiece from the profile.
At the next stage, it will be necessary to paint the profile, and then stick on top a strip of heat-resistant asbestos. Then the nichrome wire is pulled. The author uses a welding inverter as a power source.
For details on how to make a device for cutting glass at home, we recommend that you look in the video on the site.
