Homemade wobbler

Pin
Send
Share
Send

After a fisherman visited a reservoir unfamiliar to him, overgrown with algae and grass, and lost a couple of good lures, the desire to catch in this place is chopped off. In this case, you need to pay attention to homemade baits, which are not expensive to manufacture and do not mind losing them. Often in overgrown ponds there are a lot of fish that hunt in such places and probably would not mind to enjoy artificial baits.
Today we will make a do-it-yourself ultra-light wobbler with our own hands, which is easy to manufacture and pretty catchy on ponds, especially attracts the attention of striped perch and small pikes.
For homemade preparation of a wobbler from a toothbrush you will need the following material:
• old used toothbrush;
• paper clip;
• clasp with a swivel;
• triple hook with a winding ring;
• double hook with a winding ring;
• red or yellow beads for the eyes;
• pliers;
• stationery knife;
• lighter.

The process of making a homemade lightweight wobbler from a toothbrush:
1. First you need to glow on the fire with a clerical knife blade and cut off the necessary part from the toothbrush. Details can be seen in the photo. It is better not to throw out all the remaining parts of the brush, because of them you can make another bait.

2. Also cut the excess part of the nose of the wobbler with the red-hot blade of a knife as shown in the photograph.

3. Using pliers and a lighter, we bend the working blade of the future home-made wobbler, we adjust the inclination depending on the desire. We also burn with a lighter all the edges where the wobbler was cut to give it a permanent shape.

4. Proceeding to the installation of a homemade bait, we glow the carnations on the fire and make a through hole in the wobbler.

5. Extend the paper clip and insert into the hole. If it does not pass, you can also hold it a little on fire.

6. Using pliers and wire cutters we make ears for fastening hooks and fasteners.

7. We attach a double hook to the tail, and fasten the clasp with a swivel to the nasal ear.
8. We glue the bead eyes with glue and make another ear of wire, which we insert and glue into the belly of the wobbler.

9. Fasten the triple hook and get a great home-made lightweight wobbler, with which you can catch more than a dozen striped underwater hunters or pike.

Pin
Send
Share
Send