The original metal hanger with a decorative patterned lattice is not only a practical and functional item for convenient storage of outerwear (jacket, trousers, etc.), but also a stylish element of the home interior.
A floor hanger with a frame made of profile pipes 20x20 mm is easily rearranged from place to place, and also “unloads” the backs of chairs from clothes hung on them. In general, a useful thing in the household. Moreover, to make such an interior accessory is within the power of every master.
Stage 1
First, from the 20x20 mm profile pipe, it is necessary to cut the parts for the hanger frame, as well as the blanks for the coat hanger and legs, which are additionally rolled on a pipe bending machine, so that in the end we get arched products. The surface of the workpieces must be cleaned with a grinding disc.
Stage 2
From two long and two short sections of a square profile pipe, the rectangular frame of the floor hanger is first welded. Then you need to weld the legs to the bottom of the frame, and the shoulders to the top. The weld joints are cleaned with a grinder to remove all irregularities.
Stage 3
A decorative lattice is made from steel square rods 10x10 mm, the elements of which are made by hot forging. With a patterned lattice, a floor hanger for storing clothes will look much more interesting and prettier. First, inside the frame you need to weld the patterns.
And then bars from a twisted square are welded to the patterns themselves. At the last stage of work, the finished floor hanger will only have to be cleaned again with a grinding disc and painted.
