It is not always possible to find time and a suitable place even for elementary training - on the horizontal bar and uneven bars. Therefore, if you are constantly on the run or working late, but at the same time want to keep yourself in good physical shape, then install a wall-mounted horizontal bar-house.
Such a simulator is not necessary to buy, because you can do it yourself. Of the basic materials, a 60x40 mm profile will be required, 2 mm thick, as well as round steel pipes with a diameter of 32 mm and a thickness of 2 mm. To fasten the finished structure to the wall, it is best to use anchor bolts.
The main stages of work
First, it is necessary to cut the profile and round pipes in size, according to a pre-compiled drawing. Next, we weld three segments of a rectangular profile at a right angle to get a U-shaped part.
At the next stage, we weld another construction element in the form of the letter "P", only slightly wider than the previous one. A vertical stand from a profile pipe is welded to it in the center. Further, these two parts are interconnected by welding. The seams must be cleaned with a grinder.
Of the four segments of a round pipe with a diameter of 32 mm, it is necessary to weld a rectangular frame - at the edges (on one side), two short segments are welded at an angle, which will be used as inclined horizontal bar handles.
In the lower part of the simulator, two short sections of a round pipe are welded into the profile pipes - these will be the handles of the bars. Then it remains only to weld the horizontal bar itself and paint the entire structure with spray paint. The assembly process can be seen in the video on the site.
