For quick sharpening of kitchen or other knives, you can use a home-made musat sharpener made from a diode column KTs 109 A. And making such a ceramic sharpener is very simple.
It should be noted that the ceramic muss from the diode column is quite versatile in use. With it, you can sharpen or touch up almost any knife, regardless of the type of steel. Just one minute is enough to make the knife blade sharp again!
The outer shell of the diode column KTs 109 A is a ceramic case, which is ideal for sharpening knives. For this home-made sharpener you will need two tubes.
The main stages of work
Usually, a manual sharpener is made from the ceramic case of the diode pole, however, it is not safe to use it. Therefore, it is better to make a desktop version. And for this you need a wooden block, which will serve as a stand.
At the next stage, you need to bite off the metal legs on the diodes with pliers, after which you need to drill four holes for the ceramic tubes in the stand (two at an angle of 18 degrees and two at 25 degrees).
It is also necessary to drill two holes in the end face of the stand so that ceramic tubes from diode poles can be stored in them.
Well, then everything is simple - we install ceramic tubes at the right angle, and you can sharpen the knife. For details on how to make a knife sharpener from a diode pole with your own hands, see the video on the website.
