Set of grinding blocks for processing wooden workpieces

Pin
Send
Share
Send

In the manufacture of decorative wood products, jewelry polishing of parts is often required to eliminate defects on the surface.

For such work, a set of grinding stones that can be made independently is useful.

In this case, the kit consists of three sanding stones. But you can make more, or, conversely, a smaller quantity.

For the manufacture of one bar, three pieces of wood or plywood are required. In two workpieces you need to drill a hole. We connect them together with a bolt.

In the upper workpiece, cut a groove under the wing nut. The result is a sandpaper clip.

We recommend reading: a device for grinding workpieces made of metal or wood.

The main stages of work

The author prepares the third blank to the bottom of the clamp, and then processes it on a grinding machine, giving it the necessary shape.

The working surface of each bar has a different shape: straight, convex and concave. This makes it possible to process parts of different geometries.

At the last stage, it remains only to soak the surface of the products with mineral oil or simply to paint with stain.

Details on how to make a set of grinding stones for processing wooden workpieces can be found in the video on the website.

Pin
Send
Share
Send

Watch the video: Suction Plates, Vacuum Blocks & Clamping Systems wood processing. Schmalz Vietnam (March 2024).