A simple way to remove a dent without painting

Pin
Send
Share
Send

This simplest technology contains absolutely no scarce parts or tools that you would need to buy or order. We need only two things that can be found without problems in any garage. This is an unnecessary valve and a hot glue gun. And then you can do without a gun, we will melt the glue in another way.

How to remove a dent in a car?


So, let's begin. We examine the dent. We need to find the middle of this dent. Once this is done, take an unnecessary valve (if you don’t have one, ask your neighbor) and degrease with alcohol or gasoline.

Then apply hot glue to the valve head. If you only have glue without a gun, then heat the valve with a gas burner and spread the glue.
Glue the valve in the middle of the dent. Hold for a few seconds, wait until the glue sets. Let go and wait another 3-5 minutes until it cools and hardens completely.

Further, so that the valve axis does not slip out of the hands, take it with a rag or mittens. And with effort we pull in the opposite direction from the dent. Rather, even pull. Since the dent has an internal tension, she herself wants to straighten herself, but the stress forces are not enough, and in this way we help to send back to normal state and relieve this tension.

How to remove hot glue?


In general, the dent straightened. Now it remains to remove the valve if it does not fly off itself and the adhesive strip.

If the paint on the dent is factory, take acetone, spray on the glued place and carefully remove everything. If the place has already been painted, take better alcohol.
Here is such a simple way to quickly straighten a dent on a car with your own hands!

Dent removal video:


Pin
Send
Share
Send

Watch the video: How to Remove Car Dent Without Having to Repaint - DIY (March 2024).